CAD
USD
Customized Building Signage Solutions
Occupational Safety & Fire Safety Planning
Log Books, Compliance & Codes
Fire Protection Equipment & Signs
Emergency Response, Evacuation & Egress
Interior Building Identification Signs
First Aid Products & Signs
Safety Products & Signs
Workplace Safety Products & Signs
No Smoking Signs & Products
Traffic, Parking & Private Property
Marine Signs
Tactile Wayfinding Solutions
Fire Alarm, Emergency Light & Exit Sign Batteries
Emergency lighting and fire alarm equipment depend on backup power when the normal electrical supply is interrupted. An emergency light may switch on during a brief test but fail to remain illuminated for its required duration. In Ontario, self-contained emergency lighting units must be inspected and tested at least monthly and tested at least every 12 months for their design duration under simulated power failure conditions, as set out in Ontario Fire Code Article 6.7.1.6.
When a battery needs replacement, its specifications must match the equipment it supports. Safety Media offers 6 Volt and 12 Volt sealed lead acid (SLA) batteries in a range of capacities for compatible emergency lighting units, battery-backed exit signs and fire alarm panels. These batteries have a sealed, maintenance-free construction.
Emergency Light & Fire Alarm Battery FAQ
How do I choose the right replacement battery?
Check the equipment manufacturer’s documentation for the required battery voltage, type and amp-hour (Ah) capacity. Confirm the battery’s dimensions and terminal connections so it fits and connects properly. The existing battery label can help identify what is currently installed. If your equipment uses more than one battery, check the individual battery specifications and system configuration before ordering. Contact Safety Media if you need help finding a replacement.
How can I tell if an emergency light battery needs replacement?
If an emergency light fails to operate during a test or does not stay illuminated for its required duration, the unit needs further investigation. Battery condition is one possible cause, and the charging system and connected load may also affect performance. Have the equipment checked and select a battery that meets the manufacturer’s specifications if replacement is needed.